How to use INCIG Electronic Cigarettes

TEXT_BANNER_SLIDE_3_1024x192 getting started


CHARGING THE PERSONAL CHARGE CASE

DSC_1173_INCIG (2) ES96 PCC EMPTY

The INCIG Personal Charging Case (PCC) will be required to be charged before any of the batteries are charged individually. Please follow the next steps:-

  • Remove all contents from the PCC
  • Connect the empty PCC to a power supply using the USB or Wall charger. Dependant on which model of PCC you have, a battery light indicator will show when the PCC is fully charged. The model illustrated has a red light which indicates the PCC is charging. Please refer to the user manual issued with the the product.
  • Ensure you charge the PCC for a minimum of 3 hours so this is completely charged.
  • A fully charged case can charge up to 5 batteries on the go. All instructions can be found in the User Manual found by pressing this link.

 

 

 

 


RECHARGING THE BATTERY

rechargingTo charge the battery, unscrew the cartomiser from the end of the INCIG electric cigarette. Then place the end of the battery (connector side) into the charger depending on which charging applicator you have purchased.

Personal Charging Case (PCC)– simply push the battery into the charging hole situated in the PCC and the light on the battery will blink 3 times signalling it is ready to start, then it will begin charging. Once the light on the charger turns to a constant blue or green (dependant on your choice of battery) the battery is charging. When the light is off, you are all set.

USB – simply push the battery into the ‘male’ end of the charging loop, and then insert the USB male into your PC, and  the light on the battery will blink 3 times signalling it is ready to start, then it will begin charging. Once the light on the charger turns to a constant blue or green (dependant on your choice of battery) the battery is charging. When the light is off, you are all set.

Wall Charger – simply attach the ‘male’ end of the charging loop into the PCC, and then insert the wall plug into your electricity charge. The light on the battery will blink 3 times signalling it is ready to start, then it will begin charging. Once the light on charger turns to a constant blue or green (dependent on your choice of battery) the battery is charging. When the light is off, you are all set. All instructions can be found in the User Manual found by pressing this link.

NOTE : Never leave your battery charging overnight or out of sight.


PUTTING THE E-CIGARETTE TOGETHER

together

 

Remove the plastic seal from the cartomiser and remove the protective paper covering from the end in which you inhale.

Screw the cartomiser clockwise into your fully charged battery.

All instructions can be found in the User Manual found by pressing this link.

 

 

 


USING YOUR E-CIGARETTE

use_ecig

Engage the battery by puffing the e-cigarette a couple of times without inhaling.

Gradually progress into longer, smooth drags (it ensures maximum vapour).

Note: If overused, your e-cigarette will blink 15 times; in this case simply slow down your smoking intervals.

All instructions can be found in the User Manual found by pressing this link.

You can also watch our tutorial video on the link below:-

http://www.dropbox.com/s/ja93uxiqeluwqmo/MVI_1441.MOV

 


INCIG ELECTRONIC CIGARETTES, NEVER LOOK BACK…

INCIG_RECOMMEND_oblong_white (2)